Join Date: Jun 2006
Location: San Marcos, CA / Tucson, AZ
Re: Do you heel-and-toe when driving?
[quote author=zoomzoom74 link=topic=160211.msg3529179#msg3529179 date=1265232526]
[quote author=ryukensfj link=topic=160211.msg3525805#msg3525805 date=1265074524]
[quote author=drunkpark link=topic=160211.msg3525745#msg3525745 date=1265072500]
[quote author=ryukensfj link=topic=160211.msg3525733#msg3525733 date=1265072005]
[quote author=drunkpark link=topic=160211.msg3525727#msg3525727 date=1265071667]
[quote author=acedeuce802 link=topic=160211.msg3525662#msg3525662 date=1265068386]
I used double faced tape on the gas pedal. I used like the 3m mounting tape, and doubled it up on the top half of the pedal to make it contour to the gas pedal properly, and held it on with c-clamps to make sure it adheres fully. It seems sturdy and I didn't have to drill holes.
Really :shock:. I can't picture gas pedal staying put with just double side tapes....
Mine are attached with double sided tape too.
Which pedals? And how long have you been driving with them?
Is it possible to just mount them over the oem pedals?
The XenonExpert ones and I have been driving with them for 2+ years on 2 track days, multiple canyon runs, drag racing, street driving. I also heel toe with them and they haven't come off yet.
This is only for the gas pedal, the brake and clutch is attached with screws, but they can be covered up with the stock OEM rubber cover while the gas pedal is just plastic. That is one of the reason why I wanted to attached the gas pedal with double sided tape so I don't ruin the OEM pedals.
I have the XenonExpert pedals waiting in my closet for the weather to get nicer. I have all holes drilled but the gas pedal. i want to do tape as well. Did you glue the rubber to the pedal and then tape it down? Im wondering whats going to keep the pedal from slipping off the rubber.
Yes I glued the rubber to the pedal on all 3 pedals.
08 CWP Mz3 S Sport 2.3l 4dr
Current mods:F2 turbo kit, F2 exhaust, F2 BSD, F2 oil baffle kit, F2 rear swaybar, N9TH Racing Trunk Brace, KW V2 Coilovers, SPC Rear Camber Links, Medieval RMM, WORKS RSV with Dunlop Direzza Sport Z1 Star Specs, FI Grounding Kit, RKM STS, XenonExpert pedals, 15% tint, 35w DDM 6000K HIDs, Interior LEDs, Lamin-X Yellow Fogs, Sharkfin Antenna